Native recording
1Select the recording format [PH 1080/24P]*1 in the [REC FORMAT] item on the setup menu [RECORDING SETUP] screen (Page 89).
2Turn the [VFR MODE] item on the setup menu [SCENE FILE] screen [ON], and set an optional recording frame rate in the [FRAME RATE] item (Page 83).
3Press the <START/STOP> button. Native recording starts in VFR mode.
•When VFR mode is set, the audio cannot
be recorded. [
] will be displayed on the screen and the audio level meter will not be displayed. After recording starts, [VFR ON = NO AUDIO RECORDING] is displayed for five seconds. Audio is not output from the external output terminals.
•If lower frame rate (12P or lower) is set, accessing the memory card after recording takes longer. Before ejecting a memory card, confirm that the memory card access lamp is not flashing.
Standard recording |
|
| |
Shooting | |||
1 Select the recording format [PH 1080/30P]*1 | |||
or [PH 1080/25P]*2 in the [REC FORMAT] item |
| ||
on the setup menu [RECORDING SETUP] |
| ||
screen (Page 89). |
| ||
| |||
2Turn the [VFR MODE] item on the setup menu [SCENE FILE] screen [ON], and set an optional recording frame rate in the [FRAME RATE] item (Page 83).
3Press the <START/STOP> button. Standard recording starts in VFR mode.
•When VFR mode is set, the audio cannot
be recorded. [
] will be displayed on the screen and the audio level meter will not be displayed. After recording starts, [VFR ON = NO AUDIO RECORDING] is displayed for five seconds. Audio is not output from the external output terminals.
•2:2 pull down recording will be applied for a recording frame rate of 30P or 25P.
•If lower frame rate (12P or lower) is set, accessing the memory card after recording takes longer. Before ejecting a memory card, confirm that the memory card access lamp is not flashing.
*1 When [SYSTEM FREQ] = [59.94Hz]
*2 When [SYSTEM FREQ] = [50Hz]
35