Setup menu list (continued)
RECORD SETUP screen
Item | Display | Q.MENU | Description of settings | |
mode | ||||
|
|
| ||
|
|
| ||
REC FORMAT CAMERA |
| Selects the recording format. | ||
|
|
| PH 1080/60i | |
|
|
| PH 1080/30P | |
|
|
| PH 1080/24P | |
|
|
| PH 720/60P | |
|
|
| PH 720/30P | |
|
|
| PH 720/24P | |
|
|
| HA 1080/60i | |
|
|
| HG 1080/60i | |
|
|
| HE 1080/60i | |
•PH 1080/24P and PH 720/24P represent native recording.
•You cannot change the format during interval recording.
PREREC | CAMERA | Sets PRE RECORDING to ON or OFF. (Page 46) |
MODE |
| ON OFF |
•TCG is set to FREE RUN.
•Cannot be set during INTERVAL REC.
TIME STAMP | CAMERA | Specifies whether date and time information is superimposed over | |
|
| recorded images. | |
|
| ON: | Superimposes date and time information on the image. |
|
| OFF: | Does not superimpose date and time information on the |
|
|
| image. |
INTERVAL REC | CAMERA | Enables | |
|
| videos of scenes with slow movement over long periods of time. Single | |
|
| frames are recorded at the specified interval, with 24 frames equaling 1 | |
|
| second of video. | |
|
| OFF, 1 SECOND, 10 SECONDS, 30 SECONDS, 1 MINUTE, | |
|
| 2 MINUTES | |
|
| • When INTERVAL REC is enabled, the following setting items | |
|
| automatically change as follows. | |
|
| REC FORMAT: PH 1080/24P, TC MODE: NDF | |
TC MODE | CAMERA | Selects the correction mode of the internal time code generator when | |
|
| the time code of the internal time code generator is recorded. | |
|
| DF: | Uses the drop frame mode. |
|
| NDF: | Uses the |
•TC MODE is automatically set to NDF when you set recording frame rate of recording format to 24P.
TCG | CAMERA | Sets the mode in which you advance the internal time code generator. | |
|
| FREE RUN: The time code is advanced regardless of the operation | |
|
|
| mode. |
|
| A slight time error may occur when switching to PB mode if the frame | |
|
| rate is set to 24P. | |
|
| REC RUN: The time code is advanced only when recording. | |
TC PRESET | CAMERA | Sets the initial time code. | |
|
| YES | NO |
•Set the frame value to 0 or a multiple of 4 when you set recording frame rate of recording format to 24P. If any other value is set, the recorded time code will
UB PRESET | CAMERA | Sets the user information. |
|
| |
|
| YES | NO |
|
|
: Can also be configured in Quick Menu. (Page 96) |
| indicates the factory setting. | |||
102