Power sources
Using the battery
Installation
Insert the battery until it clicks into place.
ヲヶリヱヤモヮユンャレチヴヵモンヵ ラヰ
Removal
1 Set the POWER switch to OFF, and check that the mode lamp is off.
2 Remove the battery while pressing the battery release button.
• Support the battery with your hand to ensure that it will not fall.
Battery release button | Mode lamp |
| ヲヶリレチヴンヵ |
| ヤモヮユンモ |
| ヰヱヸユン |
| ャ |
| ヱラヰヵ |
Preparation
Using the AC adapter
Installation
1 Connect the DC cable to the AC adapter.
2 Plug the AC power supply cable into the power outlet.
3 Insert the DC cable’s battery connector until it clicks into place.
ヲモヶバリヷヤチレヰチヴヶヵヵモ ヵ | |
ヤモヮユンモ | |
| ャ |
ヤヰヮヱヰワヱユラワヰヵヵヰ | |
チヰヰヶヵワチヮヰュユヱヰヸユン | |
ヰョ |
|
ヤモヮチンユヮヰヵユ ョ・ヰヰヤヰヶヮヴチチリヴンバリヴ
DC cable’s battery connector 
Removal
1 Set the POWER switch to OFF, and check that the mode lamp is off.
2 Remove the DC cable’s battery connector while pressing the battery release button.
3 Disconnect the AC power supply cable from the power outlet.
•Battery cannot be recharged when the DC cable is connected to the AC adapter.
•Disconnect the AC power supply cable from the power outlet when the unit is not going to be used.
CAUTION:
•This apparatus can be operated at a voltage in the range of 110 – 240 V AC. Voltages other than 120 V are not intended for U.S.A. and Canada.
Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug.
23