SW&DISP SETUP screen (continued)
Item | Display | Q.MENU |
|
| Description of settings |
mode |
|
| |||
|
|
|
|
| |
|
|
|
| ||
SMOOTH | CAMERA |
| Selects the method in which zoom operations are stopped. | ||
ZOOM STOP | PHOTO |
| ON: | Smooth stop. | |
|
|
| OFF: | Precise stop. | |
CAM GAIN | CAMERA |
| Sets the maximum value for camera gain. | ||
LIMIT | PHOTO |
| CAMERA mode | ||
|
|
| 24 dB: | Camera gain can be set to up to 24 dB. | |
|
|
| 12 dB: | Camera gain can be set to up to 12 dB. | |
|
|
| PHOTO mode | ||
|
|
| 18 dB: | Camera gain can be set to up to 18 dB. | |
|
|
| 12 dB: | Camera gain can be set to up to 12 dB. | |
FACE | CAMERA |
| Sets the detection frame displays when OAN is selected in auto mode. | ||
FRAMING | PHOTO |
| OFF: |
| Not displayed. |
|
|
| PRIMARY: | Displays only the primary frame. | |
|
|
| ALL: |
| Displays all face detection frames. |
ZEBRA | CAMERA |
| Selects the brightness level of the | ||
DETECT | PHOTO |
| screen. |
|
|
|
| 105%, 100%, 95%, 90%, 85%, 80%, 75%, 70%, 65%, 60%, 55%, 50% | |||
MARKER | CAMERA |
| Select ON to display the marker. | ||
| PHOTO |
| ON OFF |
|
|
|
|
| To display the marker, press the ZEBRA button. | ||
GUIDE LINES | PHOTO |
| Displays guide lines for confirming level shooting. | ||
|
|
| OFF, | , | , |
•Guide lines are not recorded on images.
•Guide lines do not appear when the face detection function is set to ON.
HISTOGRAM | PHOTO | Displays a graph with the horizontal axis representing brightness, and |
|
| the vertical axis representing number of pixels. |
|
| You can determine the exposure distribution of an entire image by |
|
| viewing the distribution in the graph. |
|
| ON OFF |
■Display example
|
| Dark | Standard |
| Light | |
|
|
|
|
| ||
|
|
|
|
| ||
|
| • Adjust the brightness by adjusting the aperture. | ||||
SAFETY ZONE | CAMERA | Sets SAFETY ZONE. |
|
| ||
|
| OFF, 90%, 4:3 |
|
| ||
REC COUNTER | CAMERA | Selects counter operation during recording. |
|
| ||
|
| TOTAL: The count continues to increase until the RESET button is | ||||
|
| pressed to reset it. |
|
| ||
|
| CLIP: Resets the counter at start of recording and counts the time of | ||||
|
| each recording session. |
|
| ||
|
| • In PB mode, operation is always in CLIP mode. | ||||
: Can also be configured in Quick Menu. (Page 96) |
| indicates the factory setting. |
Menu
107