Screen displays (continued)

7Remaining battery capacity display

When using Panasonic-manufactured batteries compatible with this product, the remaining battery capacity is displayed (“m” indicates minutes).

Time remaining will be displayed after a brief pause.

•The battery display will change

→→→→

as battery capacity decreases. will be displayed in red when less than 3 minutes

are remaining, and will flash when the battery is empty.

•Remaining battery capacity may not be displayed correctly when using in high or low temperatures, or when the battery has not been used for a long period of time. To ensure that remaining battery capacity is displayed correctly, use the battery completely from a fully-charged state, and charge the battery again. (Remaining battery capacity may still not be displayed correctly if the battery has been used for long periods in high or low temperatures, or if the battery has been recharged a large number of times.)

•The remaining battery capacity display is a guideline and may change according to usage conditions.

•The remaining battery capacity display will momentarily disappear when switching between modes, when conducting REC CHECK operations or when changing the LCD brightness since the capacity is recalculated at these times.

•Not displayed when using AC adapter.

8Media capacity display CAMERA mode:

Displays the remaining recording time for the frame rate set with the REC FORMAT item in the setting menu RECORD SETUP screen.

PHOTO mode:

Displays the number of photos that can recorded under the current quality setting for the QUALITY item in the setting menu PICTURE screen.

9Media information display

Displays basic information about inserted SD Memory Card.

: (White) Playback possible (Green) Recognizing card

: No card inserted

10Metadata mark

Displayed when the META DATA REC item in the setting menu RECORD SETUP screen is set to ON. (Page 57)

11Quality display

Displays the image quality during PHOTO mode.

12Self-timer display

Displayed when the SELF TIMER item in the setting menu PICTURE screen is set.

13Recording pixel display

Displays the recording pixels during PHOTO mode.

14Recording format display (Page 102)

15Frame rate display

Displays recording frame rate.

Not displayed when set to 1080/60i.

16Marker luminance display∗2

When markers are displayed, the brightness level around the center of the screen is indicated as 0% to 99%. “99%↑” appears if the percentage is over 99.

Marker display:

During shooting, pressing the ZEBRA button once or twice will display the marker.

17Shutter speed display

The shutter speed is displayed here.

18Microphone level automatic control display Appears when in the setup menus, RECORD SETUP screen, MIC ALC, you have selected “ON”.

19Wind noise reduction display

Displayed when the WIND CUT item in the setting menu RECORD SETUP screen is set to ON.

20Focus bar display∗1

Displayed when the FOCUS ASSIST SW item in the setting menu SW&DISP SETUP screen is set to BAR.

21Function key display (Page 97)

∗1 Will not be output to external devices.

∗2 Will not be displayed when the face detection function is set to ON in the auto mode, unless FACE FRAMING is set to OFF.

88