Charging the built-in battery/Setting the time code

Recharging the built-in battery

Specifying the time code

The camera’s internal battery saves the date and time.

When SET DATE AND TIME is displayed even when the date and time are set, it means that the charge of the internal battery is depleted. Do the following to recharge it.

Reset the date and time when fully recharged.

1 Connect the AC adapter. (Page 23)

• Leave the POWER switch at OFF.

2 Leave the camera-recorder like this for about 4 hours.

•The internal battery charges during this time.

•Check the time code and menu operations after recharging.

If the date and time are not memorized after recharging, the internal battery requires changing. Please consult the place of purchase.

Setting the time code

In the setup menus, RECORD SETUP screen, set the following time code related items. (Page 102)

•TC MODE

•TCG

•TC PRESET

Set TC PRESET so you can record a value of your choice as the initial setting for the time code to be used at the start of recording.

1 Set the POWER switch to ON. (Page 26)

2 Touch the TC PRESET item in the setting menu RECORD SETUP screen.

•Menu operation (Page 95)

•Operations may also be performed using buttons on the remote control that correspond to those on the camera. For details, see “Description of parts (Remote control)”. (Page 20)

3 Touch YES.

4 Touch the item you want to set, and touch or to set the value.

Shooting

You can reset the time code to zero by pressing RESET button.

ャモンヴ ・ユャンモ ヰリヴ

ュリヴヱバ ヮヰュユ

ヤヰヶワヵユン ンユヴユヵ ヤラレ

Camera

(Continued on the next page)

59