Screen displays (continued)
■R
REC STOPPED. NOW WRITING.
Video recording has been stopped. Data is now being written to the card.
REPAIR CLIP?
Do you wish to repair clips now?
■S
SET DATE AND TIME Set the date and time.
■T
THE CLIP ARE PROTECTED. PLEASE REMOVE THE PROTECTION.
The clip is protected. Please cancel the protection.
THE RECORDING IS STOPPED (OVER THE LIMITATION)
Recording will stop. (Continuous recording for 12 hours)
THE TC MODE IS CHANGED TO "NDF"
NDF is selected as the TC MODE setting.
THIS BATTERY CANNOT BE USED.
This battery cannot be used.
THIS CARD CANNOT RECORD IN VIDEO MODE.
The card cannot be used for video recording.
THUMBNAIL DATA ERROR IS DETECTED.
An error has been detected in the thumbnail information.
■U
UNABLE TO FORMAT.
The card cannot be formatted.
Error displays
The following messages are displayed when an error has occurred in the camera or the SD Memory Card. If the problem is not solved by switching the power off and back on again, either change the card in accordance with the instructions displayed, or consult the place of purchase.
■E
ERROR OCCURRED. RECORDING IS STOPPED.
Displayed when an error has occurred during recording. Start the recording again. If the message appears again, please consult the place of purchase.
•Please switch the power off if the message continues to appear.
•Please try inserting a different card if the message appears again after restarting recording.
■P
POWER TURNED OFF DUE TO FAN STOPPING.
Displayed when an error has occurred with the fan. The power then turns off.
Wait a few minutes, and then try turning the power on again.
■S
SYSTEM ERROR TURN POWER OFF
Displayed when an error has occurred in the system. Switch the power off and back on again.
•If this error is displayed when accessing the SD Memory Card, such as when deleting a clip, the SD Memory Card may be damaged. Please replace it with a new SD Memory Card.
•If this error is displayed when repairing the SD Memory Card, please use the AVCCAM Restorer content repair software (Page 37).
92