Printing photos on a printer (PictBridge)

•A PictBridge-compatible printer is necessary. (Refer to the operating instructions for the printer.)

ヶヴャビハパ ヮリヤ

USB connection cable (optional)

1 Set the POWER switch to ON. (Page 26)

2 Connect the camera to the printer.

The USB function select screen appears.

•Connect the camera to the printer directly, and do not use a USB hub.

•Use the AC adapter to eliminate battery concerns.

3 Touch [PRINTER].

4 Touch the photo to print.

5 Touch or to set the number of copies to print.

•You can set up to 9 copies to print.

•To cancel the setting, set the number to 0.

•You can set up to 999 different photos to print.

6 Touch ENTER.

7 Touch [Tool].

Tool

8 Select whether to print the date.

•This is only available for printers that support date printing.

9 Select the print size.

STANDARD : Standard size set for the printer

4X5 INCH

: 4X5 inch size

5X7 INCH

: 5X7 inch size

4X6 INCH

: 4X6 inch size (postcard)

A4

: A4 size

•You cannot select print sizes that are not supported by the printer.

10 Select the layout.

STANDARD : Standard layout set for the printer

: Prints without frames : Prints with frames

•You cannot select layouts that are not supported by the printer.

11 Touch .

12 Touch [Printer] to print. Printer

•Touch the start button when the confirmation message appears.

•To cancel printing, touch CANCEL. A confirmation message appears. YES:

Clear print settings, and return to step 4. NO:

Keep print settings, and return to step 4.

•PictBridge will close when you disconnect the USB connection cable (optional) after printing finishes.

80