Panasonic AJ-D610WA manual 148

Warning System

	Display window (LCD)				Lamps
Item		Warning	Remain-	Remain-	WARN-		Warning	Warning	VTR (section)	Countermeasures
	Warning		ing	ing tape		REC	tone	contents	operation
		display	battery		ING
	display	status	level	length	lamp	lamp
				display
			display
				1 of the
				7 bars
				displayed;	Flashes	Flashes	Emitted	The tape is
		Flashes		5-0	1 time	1 time	4 times		Operation	Replace the tape
				display				nearing its
		F1)			per	per	per		continues.	as necessary.
				inside				end.
	E TAPE				secondF1)	second	second
TAPE END				the
	F			viewfinder
				flashes
						Flashes	Continu-	The tape has	Recording,	Replace the
				All 7 bars		4 times			playback or fast
		Flashes			Lighted		ous	reached its		cassette or rewind
				displayed		per			forward operation
						second	tone	end.	stops.	the tape.
			1 of the		Flashes	Flashes	Emitted	The battery		Replace the
					1 time	1 time	4 times		Operation
		Flashes	7 bars					has almost run		battery as
					per	per	per		continues.
			displayed					out.		necessary.
BATTERY	E BATT				second	second	secondF1)
END	F
						Flashes	Continu-
		Flashes	All 7 bars		Lighted	1 time		The battery	Operation stops.	Replace the
			displayed			per	ous	has run out.		battery.
							tone
						secondF3)
									Error code
									[00:00:00:11] will
									be displayed for
					Flashes	Flashes			5 seconds in the
									time code display
					4 times	4 times	Emitted
								REC status	position in the
					per	per	4 times			Switch the power
	No							error between	status display
No display					second	second	per			OFF and consult
	display				for	for	second	SYSCON and	window.	your local dealer.
								DV.	However, the
					3 se-	3 se-	F1)
									main unit will be
					conds	conds
									put into Enforced
									Recording mode
									and recording will
									continue.

F1) During recording

F2) During playback, fast forward or rewind

F3) During recording, the REC and BATT lamps flash in alternation.

When recording is paused (REC/PAUSE), the REC and BATT lamps flash together.

Notes{

ÁWhen trouble occurs with the external VTR connected to the unit, warnings are displayed only by the unit’s REC and TALLY lamps.

ÁWhen connecting the external VTR to the 26-pin/12-pin output adaptor and recording simultaneously with the internal and external VTRs, the REC and TALLY lamps flash if trouble occurs in either VTR. Check the warning displays of each VTR to confirm the error contents.

Warning system priorities are as follows.

1SLACK

2BATTERY END

3TAPE END

4HUMID

5SERVO

6RF

7BATTERY NEAR END

8TAPE NEAR END

– 148 –