Displaying Menus on the Viewfinder Screen

Changing the setting menu configuration

The setting menu can be configured by selecting only the pages necessary for the application. Pages are selected using the MENU SELECT page of the engineer menu mode.

When using the engineer menu, switch the unit to engineer mode as described below. The unit is switched to user mode by setting the MENU SET/OFF switch to “SET”.

The unit is switched to engineer mode by holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU SET/OFF switch to SET.

The user and engineer modes differ as follows.

User mode: Only the selected pages the setting menu can be used. The data set on each page is written to the non-volatile memory, allowing it to be stored for extended periods of time.

Engineer mode: All pages contained in the setting menu can be used. In addition, the data set at each page is written to the non-volatile memory, allowing it to be stored for extended periods of time.

If, upon completion of the adjustments and settings in the engineer mode, the menu is set to be configured only with the frequently used pages, the pages which are often needed can be called promptly.

(Select the method using the user menu selection procedure described on pages 138 to 140.)

Note{

The engineer menu will always open if the AQ-EC1 extension control unit (optional accessory) is connected to the unit and the unit is operated from an external source.

Transferring to the MAIN menus and SUB menus

 

 

 

UP/

 

 

 

 

SUB menu

 

 

 

 

 

 

 

 

 

 

DOWN

 

 

 

 

ÁPress the SHIFT/

 

 

 

button

 

 

 

 

 

 

 

 

 

 

 

ITEM button to select

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAIN MENU 1/4

 

 

 

 

 

SUB MENU

 

 

 

the items.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ÁPress the UP and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PAGE

 

 

 

 

DOWN buttons to

 

 

 

 

 

 

 

select the settings.

 

 

 

 

 

 

 

 

 

 

button

 

 

 

 

PAGE button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAIN MENU 2/4

 

 

 

 

 

 

 

 

 

 

 

PAGE button

 

 

 

 

 

 

 

 

 

 

MAIN MENU 3/4

 

 

 

 

 

 

 

 

 

 

 

PAGE button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAIN MENU 4/4

 

 

 

 

 

 

 

 

 

 

PAGE button

ÁTo select a page in a SUB menu, first move to the MAIN menu and then select the desired SUB menu.

ÁChanges are made to the settings on the SUB menus.

– 51 –