Recording

Successive Shooting in Other Cases

If successive shooting is to be performed after the tape has been run, the cassette has been ejected, or when using a tape which has only been recorded part-way, follow the procedures outlined below.

1,2

4 3

1 While monitoring the viewfinder screen, press the PLAY/PAUSE button to play back the tape.

2 At the place where a new recording is to continue on from the existing recording, press the PLAY/PAUSE (or STOP) button again to stop the tape.

3 Press the RET button on the lens. Preparations for frame-to-frame continuity are made about two seconds later.

4 Press the VTR START button of the unit or the VTR button of the lens to start recording.

– 99 –