Manual editing
Manual editing is a method used for editing which does not involve the REGISTRATION of edit points (IN/OUT points).
1.Check the connections.
2.Switch on the power.
3.Insert the cassette to be edited.
4.Press the F13 (REC INH) key on the HOME menu to set to FREE or NRML.REC.
REC INH
FREE
5.Select and adjust the input signals.
6.To record the time code, perform the time
7.To enter the desired default value for the time code, press the cursor center key at the HOME menu and set the desired value.
8.Press the ASSEMBLE or the INSERT button to display the INSERT/ASSEMBLE EDIT menu.
9.Press the F12 key on the INSERT (or the ASSEMBLE) EDIT menu to set to MANUAL EDIT, display the MANUAL EDIT menu, and highlight the F9 (INSERT or ASSEMBLE) key.
MANUAL
EDIT
10.When insert editing was selected in step 8 by pressing the INSERT button, press the F13 key on the INSERT MANUAL EDIT menu to display the INSERT MANUAL EDIT CH SELECT menu, and select the channels to be edited.
11.Set the editing timing with the F1 (TIMING) key on the INSERT (or ASSEMBLE) MANUAL EDIT SET UP menu.
TIMING
F2
How to display the ≥HOME menu: |
|
| ≥TC/CHR menu: | ≥INSERT (or ASSEMBLE) EDIT menu: | |||||||||||||||||
menus: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (or |
| )# |
|
|
| HOME |
|
|
|
|
| TC/CHR |
|
|
| INSERT | ASSEM | F12 |
| |||||||
|
|
|
|
|
|
|
|
| |||||||||||||
| ≥INSERT (or ASSEMBLE) | ≥INSERT (or ASSEMBLE) | |||||||||||||||||||
| MANUAL EDIT CH SELECT menu: | MANUAL EDIT SET UP menu: | |||||||||||||||||||
|
|
|
| (or |
| )# |
|
| # |
|
|
|
|
| (or |
| )# |
|
| ||
|
| INSERT | ASSEM | F12 | F13 | INSERT | ASSEM | F12 | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| # |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| F8 | ||||||||
– 35 –
