Panasonic AJ-HDX900E (continued), 7-2-1SYSTEM MODE, 7-2SYSTEM SETTING, 7-2-2REC FUNCTION

Chapter 7 Menu description tables (continued)

7-2 SYSTEM SETTING7-2-1 SYSTEM MODE

Item	Variable	Remarks
	range
SYSTEM MODE		For setting the system frequency and the
For AJ-HDX900E	1080-50i	recording format of the unit.
For AJ-HDX900P	1080-59.94i	When this item is switched, turn “OFF” the
	720-50P	POWER switch on the unit and then turn it
	720-59.94P	“ON” again.
		O When the remote control unit (AJ-RC10G)
		is connected, this item is not displayed.
		To switch this item, operate the main unit
C U F		independently.
CAMERA MODE	(1080-50i)	For setting the video system for shooting.
For AJ-HDX900E	50i
	25P
	(1080-59.94i)
For AJ-HDX900P	60i
	30P
	24P
	24PA
	(720-50P)
	50P
	25P
	(720-59.94P)
	60P
	30P
	24P

C U F R

<Note>

If the SYSTEM MODE item is changed while the time code is advanced in the free-run mode (the TCG switch is set to the F-RUN position.), the time code may not record properly. When the SYTEM MODE item is changed and the power of the unit is turned on again, check the time code and set it again if necessary.

7-2-2 REC FUNCTION

Item	Variable	Remarks
	range
INTERVAL REC	ON	For setting the INTERVAL REC function.
MODE	ONE SHOT	ON:
	OFF	For executing the interval recording.
		It is possible to record in intervals in
		increments of one frame.
		ONE SHOT:
		Recording is performed only once for the
		time set in the REC TIME item, after
		which it stops.
		OFF:
		Interval recording is not performed.
		For details, refer to “3-5 Recording in
C U F		intervals (INTERVAL REC function).”
INTERVAL REC	ON	For setting whether the settings in the
HOLD	OFF	INTERVAL REC MODE item are retained or
		released, when the power is turned OFF.
		ON: For retaining the settings in the
		INTERVAL REC MODE item.
		OFF: For releasing the settings in the
C U F		INTERVAL REC MODE item.

Item	Variable	Remarks
	range
REC TIME		For setting the recording time (one cut).
For 59.94 Hz	00s01f	O When the CAMERA MODE item is set to
	:	24P or 24PA, the value is set in
	59s29f
		increments of 5 frames (rounded down).
For 50 Hz	00s01f	(Minimum value: 00s05f)
	:
	59s24f
C U F
PAUSE TIME		For setting the recording pause time.
For 59.94 Hz	00h00m00s01f	O When the CAMERA MODE item is set to
	:	24P or 24PA, the value is set in
	00h04m59s29f
		increments of 5 frames (rounded down).
	:
	23h59m59s29f	(Minimum value: 00h00m00s05f)
For 50 Hz	00h00m00s01f
	:
	00h04m59s24f
	:
C U F	23h59m59s24f
TAKE TOTAL TIME	NONE	For setting the time required for shooting.
	:	Select a setting from NONE (shooting
	5day
		continues until it is stopped manually) to
C U F		5DAY (5 days).
TOTAL REC TIME	00m00s01f	For displaying the total recording time. The
	:	setting for this time cannot be changed.
	99m59s29f
		The total time yielded by adding the REC
	OVER
		TIME, PAUSE TIME and TOTAL TAKE
	100min
		TIME is displayed.
	NONE
		O This indication is just a guide for the
		recording time. It is impossible to record
		for a period longer than the recording time
		of the tape.
AUDIO REC	OFF	For setting the availability of audio records
C U F	ON	during INTERVAL REC.
START DELAY	0SEC	For setting the time taken until recording is
	:	to start after the REC START button is
	10SEC
C U F		pressed in the INTERVAL REC mode.
PRE REC MODE	OFF	For setting the PRE RECORDING function.
	ON	OFF: Recording starts about 0.4 seconds
		after pressing the REC START button
		or the VTR button on the lens.
		ON: The PRE RECORDING function is
		activated.
		For details, refer to “3-4 To record video
		signals of a few seconds before starting
C U F		recording (PRE-RECORDING function).”
PRE REC TIME	0SEC	For setting the length of time for which the
	:	video and audio signals can be recorded
	7SEC
		before the REC START button is pressed in
C U F		PRE RECORDING.
RETAKE MODE	ON	For setting the RETAKE function.
	OFF	ON: The RETAKE function is activated.
		OFF: The RETAKE function is not activated.
		It returns to OFF once the power is turned
		off.
		For details, refer to “3-6 To take the previous
F		cut again (RETAKE function).”

The underlining in the variable range column indicates the setting in the preset mode.

102