Chapter 4 Adjustments and settings for recording (continued)

Display item

What is displayed

Status when display appears

 

 

 

 

 

 

 

 

 

 

 

 

 

 

; Information

INH

 

“INH” is indicated when the operation of the USER button has been

 

 

allocated to USER

 

 

disabled.

 

 

buttons

S.GAIN

¢¢dB/OFF

This indicates the value selected for S.GAIN.

 

 

UM: USER MAIN

DS.GAIN ¢¢:/OFF

This indicates the value selected for DS.GAIN.

 

 

U1: USER1 button

LINE MIX ON/OFF

This indicates whether LINE MIX GAIN is set to ON or OFF.

 

 

S.IRIS

ON/OFF

This indicates whether S.IRIS is set to ON or OFF.

 

 

U2: USER2 button

 

 

I.OVR ON/OFF

This appears when the IRIS OVERRIDE setting is enabled (ON).

 

 

 

 

 

 

S.BLK ¢¢/OFF

This indicates whether SUPER BLACK is set to ON or OFF and, if it is

 

 

 

4

 

 

 

set to ON, it also indicates its value.

 

 

B.GAMMA ON/OFF

This indicates whether BLACK GAMMA (black level gradation

 

 

 

 

compensation) is set to ON or OFF.

 

 

 

 

 

 

 

AUDIO CH1

This appears when the input signal to recorded on audio channel 1

 

 

 

 

 

has been switched.

 

 

 

AUDIO CH2

This appears when the input signal to recorded on audio channel 2

 

 

 

 

 

has been switched.

 

 

 

REC SW

This appears only during MODE CHECK button operations while the

 

 

 

 

 

USER button functions as the REC switch.

 

 

 

Y GET ON

This appears when the function for measuring the output brightness

 

 

 

 

 

level (in % units for approx. 3 seconds for the area near the center

 

 

 

 

 

marker) is ON.

 

 

 

RET SW

This appears only during MODE CHECK button operations while the

 

 

 

 

 

USER button functions as the RET switch.

 

 

 

DRS

 

This appears when the DRS function is turned on.

 

 

 

 

 

 

 

 

<Extender

EX2

 

This appears when the lens extender is in use.

 

 

 

 

 

 

 

 

= Color temperature

¢.¢K

 

This indicates the color temperatures assigned to the A, B, and PRE

 

 

 

 

 

positions of the WHITE BAL switch. (These may be memory values

 

 

 

 

 

during AWB operation or menu setting values.)

 

 

 

 

 

 

 

 

> Filter positions

1 to 4

 

This indicates the position of the ND filter.

 

 

 

A to D

 

This indicates the position of the CC filter.

 

 

 

 

This indicates that the filter has not been set to a proper position.

 

 

 

 

 

 

 

 

? WHITE BAL switch

A

 

This indicates that the WHITE BAL switch is set to channel A.

 

 

position

B

 

This indicates that the WHITE BAL switch is set to channel B.

 

 

 

P

 

This indicates that the WHITE BAL switch is set to PRE.

 

 

 

 

 

 

 

@ Cumulative gain

6:/10:/12:/15:/20:

This indicates the value of the cumulative gain (DS.GAIN) when this

 

 

display

 

 

gain function is working.

 

 

 

 

 

 

 

 

A LINE MIX GAIN

M

 

This appears when LINE MIX GAIN (+6 dB) is active.

 

 

display

 

 

 

 

 

 

 

 

 

 

 

B Gain value

¢¢dB

 

This indicates the current gain value.

 

 

 

 

 

 

 

C VTR warnings,

REC WARNING

This indicates that a problem has occurred during recording.

 

 

information

SLACK E-¢¢

This indicates that a problem has occurred in a mechanism.

 

 

 

 

 

Depending on the nature of the trouble concerned, the power may be

 

 

 

 

 

turned off automatically.

 

 

 

HUMID

 

This indicates that condensation has formed.

 

 

 

SERVO

This indicates that servo lock has not been initiated during recording

 

 

 

 

 

or playback.

 

 

 

RF

 

This indicates that the level of the signals from the tape has dropped.

 

 

 

BACKUP BATT EMPTY

This signals that it is time to replace the backup battery. (Refer to

 

 

 

 

 

page 93)

 

 

 

WIRELESS-RF

This indicates that the level of the RF signal from the wireless

 

 

 

 

 

microphone receiver has dropped.

 

 

 

 

 

<Note>

 

 

 

 

 

For details on the codes displayed in this area, refer to “6-3-2 Error

 

 

 

 

 

codes.”

 

 

 

 

 

 

 

 

D Time code display

TCG

12:59:59:20

This indicates the TCG (time code generator) value.

 

 

 

TCR

12:59:59:20

This indicates the TCR (time code reader) value.

 

 

 

(V)UBG

AB CD EF 00

This indicates the UBG VUBG display.

 

 

 

(V)UBR

12 34 56 78

This indicates the UBR VUBR display.

 

 

 

CTL

–01:59:59:20

This indicates the CTL-COUNTER value.

 

 

 

 

 

 

 

 

53