Panasonic AJ-HDX900E (continued), 7-2-3OUTPUT SEL, 7-2-4VIDEO OUT SETTING

Chapter 7 Menu description tables (continued)

7-2-3 OUTPUT SEL

Item	Variable		Remarks
	range
OUTPUT ITEM	MENU	For setting the characters superimposed on
	ONLY	the output signals from the VIDEO OUT
	TC	connector.
	STATUS	MENU ONLY:
		The menu screen is superimposed only
		when the menu is accessed. This
		normally displays nothing.
		TC:
		Time codes are superimposed (when the
		menu is accessed, the menu screen is
		superimposed.)
		STATUS:
		The characters that are the same as the
		characters	superimposed in the
		viewfinder	screen are superimposed.
		(When the menu is accessed, the menu
		screen is superimposed.)
		For details, refer to “4-8-1 Settings of signals
C U F		output from VIDEO OUT connector.”
MONI OUT	HD-SDI	For setting video signals output from the
	HD-Y	MON OUT connector.
		HD-SDI:
		For outputting the HD SDI signals
		HD-Y:
		For outputting the analog HD-Y signals
		For details, refer to “4-8-2 Settings of signals
C U F		output from MON OUT connector.”
MONI OUT CHARA	ON	For superimposing characters on the HD
	OFF	SDI output signals from the MON OUT
		connector.
		ON: To superimpose
		OFF: Not to superimpose
		<Note>
		This does not link with the VIDEO OUT
C U F		CHARACTER switch.
MONI OUT MODE	CAM	For switching the signals output from the
	VTR	MON OUT connector.
		CAM: The camera images are output at all
		times.
		VTR: In the recording or other EE mode,
		camera images are output from the
		connector; in playback mode, the
C U F		VTR’s playback signals are output.
VF MODE	CAM	For switching the display mode of the
	VTR	viewfinder screen.
		CAM: The camera images are output at all
		times.
		VTR: In the recording or other EE mode,
		camera images are displayed; in
		playback mode, the VTR’s playback
C U F		images are displayed.

The underlining in the variable range column indicates the setting in the preset mode.

7-2-4 VIDEO OUT SETTING

Item	Variable			Remarks
	range
VIDEO OUT	OFF	For setting the center marker to be
CENTR MARK	1	superimposed on the output signals of the
	2	VIDEO OUT connector.
	3	OFF: The center marker is not displayed.
	4	1:	+ (large)
		2:	Center blank (large)
		3:	+ (small)
C U F R		4:	Center blank (small)
VIDEO OUT	OFF	For setting the type of safety marker frame
SAFETY MARK	1	to be superimposed on the output signals of
	2	the VIDEO OUT connector.
		OFF: The safety marker frame is not
			displayed.
		1:	Box
					7
		2:
			Corner frames
C U F R
SAFETY AREA	80%	For setting the size of the safety marker.
	:	It is possible to set the size by units of 1%
	90%
		with a fixed ratio between of width and
	:
C U F R	100%	height.
VIDEO OUT FRM	ON	For superimposing the frame marker on the
MARK	OFF	output signals from the VIDEO OUT
		connector.
		ON: To superimpose
C U F R		OFF: Not to superimpose
FRM SIG	4:3	For setting the frame marker.
	13:9	The VISTA setting is 16:8.65.
	14:9
C U F R	VISTA
VIDEO OUT USER	ON	For superimposing the user box on the
BOX	OFF	output signals from the VIDEO OUT
		connector.
		ON: To superimpose
		OFF: Not to superimpose
		O It is not superimposed when the VIDEO
			OUT switch is set to the SD-SDI or VBS
C U F R			position.
USER BOX WIDTH	1	For setting the horizontal width of the user
	:	box.
	13
	:
C U F R	100
USER BOX	1	For setting the vertical height of the user
HEIGHT	:	box.
	13
	:
C U F R	100
USER BOX H POS	–50	For setting the horizontal position of the user
	:	box center.
	+00
	:
C U F R	+50
USER BOX V POS	–50	For setting the vertical position of the user
	:	box center.
	+00
	:
C U F R	+50

O The user box can be displayed in any position as a box- type cursor.

O When the DOWNCON MODE item on the DOWNCON SETTING screen is set to LT-BOX or S-CROP, the frame marker and the safety marker are not displayed.

103