Panasonic AJ-HDX900E (continued), 7-4-2VF MARKER, 7-4-3VF USER BOX

Chapter 7 Menu description tables (continued)

7-4-2 VF MARKER

	Item	Variable	Remarks
		range
TABLE	A		For selecting the VF MARKER setting table.

BThis item is used to set the current values of table A or B which have been selected using

C U F R		the menu items listed below.
CENTER MARK	OFF	For selecting the center marker.
	1	OFF: The center marker is not displayed.
	2	1:	+ (large)
	3	2:	Center blank (large)
	4	3:	+ (small)
C U F R		4:	Center blank (small)
SAFETY MARK	OFF	For	selecting the type of safety marker

1frame.

2OFF: The safety marker frame is not displayed.

1:Box

2:Corner frames

C U F R
SAFETY AREA	80%	For setting the size of the safety marker.
	:	It is possible to set the size by units of 1%
	90%
		with a fixed ratio between of width and
	:
C U F R	100%	height.
FRAME MARK	ON	For selecting ON or OFF for the frame
C U F R OFF		marker.
FRAME SIG	4:3	For setting the frame marker.
	13:9	The VISTA setting is 16:8.65.
	14:9
C U F R	VISTA
FRAME LVL	0	For setting the level outside the frame
	:	marker.
	15
		0: Equivalent to signal OFF (Blanking
		state)
C U F R		15: Same brightness as center area

7-4-3 VF USER BOX

Item	Variable	Remarks
	range
USER BOX	ON	For setting whether the user box is displayed
	OFF	in the viewfinder or not.
C U F R
USER BOX WIDTH	1	For setting the horizontal width of the user
	:	box.
	13
	:
C U F R	100
USER BOX	1	For setting the vertical height of the user
HEIGHT	:	box.
	13
	:
C U F R	100
USER BOX H POS	–50	For setting the horizontal position of the user
	:	box center.
	+00
	:
C U F R	+50
USER BOX V POS	–50	For setting the vertical position of the user
	:	box center.
	+00
	:
C U F R	+50

O The user box can be displayed in any position as a box- type cursor.

The underlining in the variable range column indicates the setting in the preset mode.

116