Chapter 5 Preparation (continued)

Using the NP-1 type battery pack

CAUTION:

These servicing instructions are for use by qualified service personel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

1

2

Remove the battery holder.

Attach the NP-1 type battery case to the unit.

 

5

 

 

1 Tighten the mounting screws.

3 Set the battery type.

2 Tighten the power contact screws.

Select the battery type using the BATTERY SELECT

3 Insert the top of the detached cover in the direction

menu item.

This item is selected from the

shown by the arrows.

<BATTERY/TAPE> screen on the VTR FUNCTION

4 Align the holes in the bottom of the cover (metal part)

page.

 

with the holes at the bottom of the case, and use the

When using another battery which cannot be selected

screws to attach the case.

using the BATTERY SELECT item setting, select TYPE

<Note>

A or TYPE B, and set the items that correspond to the

When mounting the battery holder, take care not to pinch

characteristics of the battery.

the connecting cord.

For details, refer to “7-8-4 BATTERY SETTING2.”

NP-1 type Battery case

<Note>

 

 

Address all inquiries concerning the V-mount adapter

1

plate to your dealer.

4

23

Using the V-mount type battery pack

Attach the V-mount adapter plate.

Insert it in the direction shown by the arrows, and slide it into place.

81