Chapter 4 Adjustments and settings for recording (continued)
Display item | What is displayed |
| Status when display appears | |
|
|
|
| |
|
|
|
| |
E AUDIO input | This indicates the audio channels selected and their audio levels. | |||
system and level | F | This appears when the AUDIO IN switch is at the FRONT position. | ||
meter | W | This appears when the AUDIO IN switch is at the WIRELESS position. | ||
|
| R | This appears when the AUDIO IN switch is at the REAR position. | |
|
|
|
| |
F Super black ON | B | This appears when S.BLK has been set to ON. | ||
|
|
|
| |
G Super iris ON | S | This appears when S.IRIS has been set to ON. | ||
|
|
|
| |
H Iris override | ++ | When the iris override function is working, this indicates how much | ||
display | + | compensation is provided. | ||
|
| (No display) | ++: | The aperture is opened by a full stop. |
|
| – | +: | The aperture is opened by a half stop. |
|
| – – | – | The aperture is closed by a full stop. |
|
|
| The aperture is closed by a half stop. | |
|
|
| No display: Reference status | |
|
|
|
| |
I Iris, | NC | This appears when the lens cable is not connected. | ||
|
| OPEN | This appears when the lens aperture is open. | |
|
| F1.7 to F16 | This indicates the aperture value | |
|
| CLOSE | This appears when the lens aperture is closed. | |
|
|
| <Note> |
|
|
|
| These displays appear when using a lens equipped with an aperture | |
|
|
| value display function. They flash while the aperture is being | |
|
|
| changed for the iris override. | |
|
|
|
| |
J Zoom display | Z00 to Z99 | This indicates the amount of zoom. Note that this item is not displayed | ||
|
|
| even if the display setting is ON if the lens is not equipped with a | |
|
|
| zoom position return function. | |
|
|
|
| |
K Interval, | i (flashing) | This appears in the INTERVAL REC mode during the times when the | ||
display |
| operation of the REC button is not acknowledged before the start of or | ||
|
|
| at the end of recording. | |
|
| iREC (lighting) | This appears during an INTERVAL REC operation. | |
|
| iREC (flashing) ¢¢h¢¢m/¢¢s | This appears during INTERVAL REC standby to indicate the wait time | |
|
|
| until the next recording. | |
|
| This indicates the amount of time remaining until the end of the set | ||
|
|
| PRE REC time during PRE REC operation. | |
|
| TAPE ¢s | This appears when recording is stopped by turning OFF the PRE | |
|
|
| REC MODE (in the state where signals accumulated in the | |
|
|
| memory are recorded on tape). | |
|
|
|
| |
(Jump indication) | JUMP (flashing) | This appears during the jump function. | ||
|
|
|
| |
L Dynamic range | DRS | This appears when the video level of a part with high brightness is | ||
stretcher mode |
| compressed, and the function stretching the dynamic range is | ||
|
|
| selected. |
|
|
|
|
| |
M Compression | COMP | This appears when setting the mode for suppressing distortion of | ||
mode |
| compressed video images that may occur when dark parts are shot. | ||
|
|
|
|
|
54