Operating Instructions
107
2.8.1 Configuring the Settings
To use remote access functions, you must install the recording software on the
remote server and remote clients.
Before you can use remote access functions, you must install the recording
software on your PC.
Note
• You must register one license for each remote server and remote client PC.
• If you do not use remote access functions, this software install on the remote
server and remote client can use the software as a normal recording
software.
[Remote Server Settings (remote server function)]
Configure the following settings after installing this software on a PC to be used as
a remote server.
1. Select [Remote Access] [Settings] on the menu bar.
2. Select the [Use Remote Access Connection] check box on the [Settings]
screen.
3. Select [Operate as a server], configure the server settings and click [OK].