
Preparation
ACheck and identify the supplied accessories.
If you do not find the described accessories, contact Panasonic Technical Support ( | page 35). |
| ||||
• AC Adaptor | 1 | • AC Cord | 1 | • Battery Pack . . . . . 1 | • Modem Telephone |
|
|
|
|
|
| Cable | 1 |
Model No: | Model No: |
• Product Recovery | 1 |
• Operating Instructions (This book) | 1 |
• Windows® Book | 1 |
You will need the serial number when you reinstall B’s Recorder/B’s CLiP ( page 25). | |
B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging ( page 29). |
1 |
2 |
A |
1 |
B |
D |
C |
2 |
1 Insert the battery pack.
AReverse the computer, then press and hold the mark part (A).
BSlide and remove the cover.
CInsert the battery pack (B) until it securely fits the connector.
DSlide the cover back.
To remove the battery pack
In step C above, slide and hold the latch (C), and pull the tab (D) of the battery pack.
CAUTION
Make sure the cover is securely attached. Otherwise the battery pack may fall when you carry the computer.
Do not touch the terminals of the battery pack and the computer. Doing so can make the terminals dirty or damaged, and may cause malfunction of the battery pack and the computer.
Be sure to attach the cover for use.
2 Connect your computer to a power outlet.
The battery charging starts automatically.
CAUTION
Do not disconnect the AC adaptor and do not switch the wireless switch to on until the
When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor.
Handling the AC adaptor
Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone.
Appendix Troubleshooting Useful Information Getting Started
11