9.1.9.Removing the Wireless Module and MDC Module
<N9> | Kapton Tape |
Antenna Cable (Black)
Antenna Cable (Gray)
Wireless Module
<N9>
MDC Module
Modem Cable
Note:
After replacing the Main Board, rewrite the BIOS ID.
1.Disconnect the ten Cables from the ten Connectors (CN6, CN7, CN24, CN19, CN28, CN21, CN802, CN18, CN15, CN25).
2.Remove the six Screws <N9>.
3.Remove the Main PCB.
4.Remove the MP Guide.
Screws <N9>: DFHE5025XA
9.1.11.Removing the PC Card Ejector and
Lithium Battery
Tape
PC Card Ejector
(to CN14)
1.Remove the two Antenna Cables from the two Connec- tors.
•Antenna Cable (Black): MAIN Connector
•Antenna Cable (Gray): AUX Connector
2.Remove the two Screws <N9>.
3.Remove the Wireless Module.
4.Remove the two Screws <N9>.
5.Disconnect the Modem Cable from the Connector.
6.Remove the Kapton tape and remove the MDC Module.
Screws <N9>: DFHE5025XA
9.1.10. Removing the Main PCB
<N9> | CN21 |
CN6 | CN802 |
| |
| CN18 |
Main PCB | CN15 |
CN7
CN24
CN28<N9>
CN19
MP Guide
CN26
CN14
Main PCB
<N9>
1.Remove the two Screws <N9>.
2.Remove the PC Card Ejector.
3.Disconnect the Cable from the Connector (CN14).
4.Remove the Lithium Battery.
Screws <N9>: DFHE5025XA
