Panasonic CF-74GCDADBM service manual Removing the USB PCB, Removing the Display unit

9.1.15. Removing the USB PCB

<N9>

CN1701

USB PCB

1.Disconnect the Cable from the Connector (CN1701).

2.Remove the two Screws <N9>.

3.Remove the USB PCB.

Screws <N9>: DFHE5025XA

9.1.16. Removing the Display unit

<N6>

Display Unit

Hinge

Screw<N6>

Cover L

Gasket

<N6>	Hinge
	Screw
	Cover R
	<N6>

9.1.17. Removing the LCD Front Cabinet

LCD Leg Rubber	<N16>	LCD Leg
		Rubber

<N15>

LCD Front

Cabinet

<N15> LCD Unit

1.Remove the two LCD Leg Rubbers, and then the two Screws <N16>.

2.Remove the two Screws <N15>.

3.Release the 23 Hooks joining the LCD Front and Rear Cabinet on the LCD Front Cabinet outward. (See the Fig- ure),

4.Remove the LCD Front Cabinet.

Screws <N15>: DRHM0075ZA

Screws <N16>: DXQT2+G4FCL

9.1.18. Removing the LCD and the Inverter

LCD Unit

Inverter

Inverter Case

<N18>	W-LAN PCB L
LCD/INV. Cable
	<N18>

W-LAN PCB R

1.Remove the four Screws <N6> from the computer bottom side.

2.Remove the two Screws <N6> from the computer upper side.

3.Remove the Display Unit.

4.Remove the Hinge Screw Cover L and R.

5. Remove the Gasket. LCD Rear Cabinet

Screws. <N6>: DXSB3+6FNL

9-6