Panasonic CF-P1 operating instructions First-time Operation, Install the battery pack, Latch

First-time Operation

1 Install the battery pack.

(1)Turn your computer over.

(2)Slide the latch and remove the battery pack cover.

If it is difficult to slide the latch, press position (A) and then slide the latch.

NOTE

If the attached strap makes it difficult to remove the battery pack cover, unbuckle the strap and then re- move the cover.

(3)Set the arrow mark of the battery in the direction shown in the figure, and then insert the battery pack into the battery pack compartment.

(4)Align the projecting part of the cover with the hole, attach the cover at an angle, and then set the cover on the body. Slide the latch to lock the cover.

If it is difficult to slide the latch, press position (A) and then slide the latch.

Battery Pack Cover

Latch (A)

Arrow Mark

(A)

NOTE

After attaching the battery pack cover, slide the latch all the way to the left.

2 Connect your computer to a power outlet.

When the AC adaptor is connected to the computer, charg- ing begins automatically.

Charging Time: Approx. 3 hours

This computer is equipped with a memory backup battery which automatically charges from the fully-charged lithium- ion battery. This backup battery retains data in memory when the lithium-ion battery is removed, and takes 24 hours to charge when you first use this computer.

NOTE

If you remove your lithium-ion battery before the lithium-ion battery is fully charged, data may be lost. For this reason, do not remove the battery within the first 24 hours of use.

The [Backup Battery Very Low] message is displayed until the backup battery is sufficiently charged.

Latch

3

1

2

11