Dealing with Problems
Resetting Your Computer
When the computer fails to respond to an operation, reset your computer. There are two methods for resetting the computer.
Performing a Reset
This selection saves all stored records and entries and then restarts the | Reset Switch |
computer. |
|
Unsaved data in open windows may be lost. |
|
Push the reset switch using the stylus. |
|
Performing an All Reset
This selection erases all stored records and entries and then restarts the computer.
Therefore, never perform an all reset unless a reset does not solve your problem.
(1)Push the reset switch using the stylus while holding down on the power switch.
(2)At the confirmation message, press Y .
(3)Calibrate the touchscreen.
(4)
When inputting all information (Date, time, and time zone):
1)Input the time zone and tap [Apply].
2)Input the date and time, and tap [Apply] or [OK].
When you input the time zone and tap [Apply], the date and time will automatically be adjusted to accommodate the time difference.
For this reason, if the date and time are input first, it will be necessary to reset the date and time after the time zone has been set.
When inputting date and time only:
Input the date and time, and tap [Apply] or [OK].
28
