6.2.3.Removing the HDD
Preparation : perform the section 6.2.1. 6.2.2. first.
1.Remove the 2 screws (C) and then remove the HDD cover. Screw (C):DFHE5025XA(N501)
Screw(C)
HDD Cover
Tape
6.2.4.Removing the Top Case
Preparation : perform the section 6.2.1. , 6.2.2. first.
1.Remove the 7 screws (D) and 5 screws (G). Screw (D):DXHM0039ZA(N5)
Screw (G):DXHM0057ZA(N7)
Screw(G)
Screw(D) Screw(D)
Screw(D)
Screw(D)
Screw(G) |
|
Screw(G) |
|
Screw(G) | Screw(G) |
|
2.Lift up the HDD unit and remove FFC connector and then remove the HDD unit.
3.HDD is taken out of the HDD case.
Note:
Please do not bend pins of the HDD connector, at the time of removing HDD and FFC connector.
HDD Case
HDD
FFC Connector
2.Remove the speaker cable from the connector (CN26).
3.Remove the side cover (R) as slide it to this side.
4.Remove the 1 screw (J), 3 screws (K) and 2 screws (L) from top case and then remove the top case.
Screw(J):DXHM0056ZA(N6)
Screw(K):DXQT2+E6FNL(N12)
Screw(L):DXQT26+D8FCL(N15)
Screw(L)
HDD Unit
HDD FFC
| CN26 | Screw(L) |
| Speaker Cable | |
Screw(K) |
| |
|
|
Screw(J)
Screw(K)
Screw(K)
Side Cover(R)
29
