Panasonic CF-VDR301U specifications Using the Software, Installing EASY MEDIA CREATOR, E Note

Using the Software

Installing EASY MEDIA CREATOR

To install the software application, follow the procedure below.

CAUTION

1 GB of free space on the hard disk is needed to install all the components of “EASY

MEDIA CREATOR.”

Close all other software application before running the Setup program for “EASY

MEDIA CRAETOR.”

Log on to Windows as an administrator.

ENOTE

Depending on the computer, preparatory steps may be necessary before installa- tion. Before installing the application, be sure to read the Operating Instructions or Reference Manual of the computer.

1Log on to Windows as an administrator.

2Set “DVD Drive Utility Disc” in the drive.

3At the confirmation message, click [OK].

[Utility Setup tool] screen will appear (allow some time for disc recognition).

When the setup program will not run automatically, input [x:\setuputil.exe]*1 in [start]

- [Run] and click [OK].

*1 “x” is the drive letter. You can change the letter to suit your preference.

4Click [Easy Media Creator Setup].

5Select your language at [Choose Setup Language], then click [OK]. Follow the on-screen instructions.

During the installation, you will be required to agree the License Agreement. After reading the agreement, click [I accept the terms in the license agreement], then click [Next].

6Click [Finish].

7A message appears advising that the computer must be restarted. Click [Yes].

The following settings are required to use discs containing data written using Drag- to-Disc with Roxio’s DirectCD5 which has been installed on another computer.

ASelect on the [Drag-to-Disc] screen, and click [Settings].

BClick [Advanced Eject Settings], and click [UDF version on current disc] in [Nonrewritable Media] and [Rewritable Media].

CClick [OK].

DClick [OK].

14