Panasonic CF-VDR301U Troubleshooting, An error may occur if, after the tray has been closed

Models: CF-VDR301U

1 80
Download 80 pages 11.94 Kb
Page 21
Image 21
Troubleshooting

Troubleshooting

The computer does not recog-

Check the settings by following the instructions in

nize the drive

 

“Preparations” (

page 8).

 

 

 

Is the drive properly mounted in the multimedia

 

 

pocket?

 

 

 

 

Restart the computer.

 

The Multimedia pocket device

Is the disc loaded on the tray correctly?

 

status indicator

does not light

(

page 8)

 

 

Cannot play disc or read data

Is the disc bent, scratched, or dirty?

 

from it

 

An error may occur if, after the tray has been closed

 

 

or operation has been resumed from the standby/hi-

 

 

bernation modes, the drive is accessed before the

 

 

Multimedia Pocket device status indicator

goes

 

 

off. Also, an error may occur if the drive is accessed

 

 

by the application software automatically. In a case

 

 

like this, remove the disc, re-insert it, and try again.

“EASY MEDIA CREATOR”

Is writing software other than “EASY MEDIA

do not work properly

CREATOR” installed?

 

 

 

Uninstall the writing software other than “EASY

 

 

MEDIA CREATOR.”

 

 

 

Be sure to disable writing to CDs.

 

 

 

Right-click [(x:)]*1 in [start] - [My Computer], click

 

 

[Properties] - [Recording], then remove the check

 

 

mark for [Enable CD recording on this drive].

 

 

(Remove the check mark for [Enable CD recording

 

 

on this drive] every time a new user is added.)

 

 

*1

“x” is the drive letter. You can change the letter to

 

 

 

suit your preference.

 

Cannot eject disc

 

Turn on the computer.

 

 

 

To remove a disc when the

 

 

 

computer is powered off, insert

 

 

 

a pointed object (e.g., the bent-

 

 

 

out tip of a paper clip)

 

 

 

into the emergency hole (A). Pushing it completely

 

 

to the end will free the tray so that it can be pulled

 

 

out. (The position of the emergency hole differs

 

 

depending on the drive.)

 

 

 

If a disc with fingerprints or other dirt is used, you

 

 

may not be able to remove it. Use a clean disc.

 

 

(

page 7)

 

 

The disc tray does not close

Do not touch the eject button when closing the tray.

Other disc operation problems

Use another drive or media.

 

E

21

Page 21
Image 21
Panasonic CF-VDR301U Troubleshooting, An error may occur if, after the tray has been closed, suit your preference