9.2. Outdoor | 26 |
| 13.1. Protection Control For All Operations | 47 |
10 Printed Circuit Board | 27 |
| 13.2. Protection Control For Cooling & Soft Dry |
|
10.1. Indoor Unit | 27 |
| Operation | 49 |
10.2. Outdoor | 29 |
| 13.3. Protection Control For Heating | 50 |
11 Installation Instruction | 30 | 14 | Servicing | 51 |
11.1. Select The Best Location | 30 |
| 14.1. Auto OFF/ON Button | 51 |
11.2. Indoor/Outdoor Unit Installation Diagram | 30 |
| 14.2. Select Remote Control Transmission | 51 |
11.3. Indoor Unit | 31 |
| 14.3. Remote Control | 52 |
11.4. Outdoor | 34 | 15 | Troubleshooting Guide | 53 |
12 Operation | 37 |
| 15.1. Refrigeration Cycle System | 53 |
12.1. Basic Function | 37 |
| 15.2. Breakdown Self Diagnosis Function | 55 |
12.2. Indoor Fan Motor | 38 |
| 15.3. Error Codes Table | 56 |
12.3. Outdoor Fan Motor | 39 | 16 | Disassembly and Assembly Instructions | 57 |
12.4. Airflow Direction | 39 |
| 16.1. Indoor Electronic Controllers, Cross Flow Fan |
|
12.5. Quiet operation (Cooling Mode/Cooling area |
|
| and Indoor Fan Motor Removal | 57 |
of Dry | 40 |
| 16.2. Outdoor Electronic Controller Removal |
|
12.6. Quiet operation (Heating) | 40 |
| 61 | |
12.7. Powerful Mode | 41 | 17 | Technical Data | 62 |
12.8. Timer | 41 |
| 17.1. Operation Characteristics | 62 |
12.9. Auto Restart | 41 |
| 17.2. Sensible Capacity Chart | 74 |
12.10. Indication | 42 | 18 | Exploded View and Replacement Parts | 75 |
12.11. Patrol Operation | 42 |
| 18.1. Indoor | 75 |
12.12. | 44 |
| 18.2. Outdoor Unit | 77 |
13 Protection Control | 47 |
|
|
|
1 Safety Precautions
•Read the following “SAFETY PRECAUTIONS” carefully before perform any servicing.
•Electrical work must be installed or serviced by a licensed electrician. Be sure to use the correct rating of the power plug and main circuit for the model installed.
•The caution items stated here must be followed because these important contents are related to safety. The meaning of each indication used is as below. Incorrect installation or servicing due to ignoring of the instruction will cause harm or damage, and the seriousness is classified by the following indications.
This indication shows the possibility of causing death or serious injury.
This indication shows the possibility of causing injury or damage to properties.
• The items to be followed are classified by the symbols:
This symbol denotes item that is PROHIBITTED from doing.
•Carry out test run to confirm that no abnormality occurs after the servicing. Then, explain to user the operation, care and maintenance as stated in instructions. Please remind the customer to keep the operating instructions for future reference.
1.Engage dealer or specialist for installation and servicing. If installation or servicing done by the user is defective, it will cause water leakage, electrical shock or fire.
2.Install according to this installation instructions strictly. If installation is defective, it will cause water leakage, electrical shock or fire.
3.Use the attached accessories parts and specified parts for installation and servicing. Otherwise, it will cause the set to fall, water leakage, fire or electrical shock.
4.Install at a strong and firm location which is able to withstand the set's weight. If the strength is not enough or installation is not properly done, the set will drop and cause injury.
5.For electrical work, follow the local national wiring standard, regulation and the installation instruction. An independent circuit and single outlet must be used. If electrical circuit capacity is not enough or defect found in electrical work, it will cause electrical shock or fire.
2