Panasonic CX-DVP292U Specifications, Connecting side brake parking brake connection lead

Electrical Connections (continued)

❐Connecting side brake (parking brake) connection lead

E

N

GCaution:

L≥ For safety, be sure to ask your nearest professional installer to do this connection.

I

S

H

35 Side brake (parking brake)

The side brake (parking brake) switch position varies with the car model.

For details on the exact location of the parking brake switch in your car, contact your dealer.

Foot brake	Parking brake
	switch

Cords connected to the vehicle.

		Side brake (parking brake)
		connection lead
Battery		PARKING BRAKE
	5 Clamp connector
Brake lamp		(Blue/yellow stripe)
Chasiss	Of the 2 cords emerging from the parking brake switch,
	connect the player’s parking brake cord to the one that is
	not connected to the vehicle’s chassis while the brake is
	in the released state.

Connecting the Clamp Connector 5

≥Attach the clamp connector to the vehicle cord at a suitable position.

≥Note that if the cord being clamped onto is too thin (0.3 mm2 or less), the connection may not be adequate.

1 Push the end of the side brake	2 While making sure that the cords	3 Close the cover until
cord into the hole on the clamp	do not slip out of the clamp	it snaps shut.
connector.	connector, press the element
Place the vehicle cord into the	down with a pair of pliers.
groove in the clamp connector.
Vehicle cord	Element
Push the end of the cord
in until it touches this part.
Parking brake cord		Cover

44

Specifications

Supply voltage:	12 V DC (10.8 V–16 V), test voltage 14.4 V, negative ground
Current consumption:	Less than 2.0 A	E
Signal system:	NTSC 1.0 Vp-p 75 ≠ RCA pin jack	N
Discs played:	(1) DVD-VIDEO disc	G
		L
	5z (12 cm) single-sided, single-layer/double-layer	I
	5z (12 cm) double-sided, single-layer/double-layer	S
		H
	3z (8 cm) single-sided, single-layer/double-layer	36
	3z (8 cm) double-sided, single-layer/double-layer

(2)Compact disc (CD-DA, VIDEO CD, CD-ROM, CD-R, CD-RW) 5z (12 cm) disc

3z (8 cm) disc

Audio output level:	600 ≠ (2 ch 2.5 Vrms Max.)
Audio signal
output characteristics:	(1)	Frequency response:	20 Hz–20 kHz
	(2)	S/N ratio:	95 dB (IHF, A)
	(3)	Wow and Flutter:	Below measurable limits
Dimensions (WaHaD):	7za115/16za61/8z (178a50a155 mm)
Weight:	3 lbs. 5 oz (1.5 kg)

Digital audio output:

Disc	Sound recording format	Optical digital audio output from connector
DVD	Dolby Digital	Dolby Digital bitstream (1–5.1 ch)
	DTS†	DTS bitstream (1–5.1 ch) (The analog portion is not output.)
	Linear PCM	Linear PCM (2 ch)
	(48 kHz 16/20/24 bit)	(48 kHz sampling/16 bit only)
Video CD	MPEG 1	MPEG 1 bitstream
	Linear PCM	Linear PCM (2 ch) (44.1 kHz sampling/16 bit)
CD	Linear PCM	Linear PCM (2 ch) (44.1 kHz sampling/16 bit)
	DTS†	DTS bitstream (1–5.1 ch) (The analog portion is not output.)
MP3	MP3	Linear PCM (2 ch) (32 kHz/44.1 kHz/48 kHz sampling/16 bit )

†DTS only works with optical outputs.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Above specifications comply with EIA standards.

Note:

≥Specifications and design are subject to modification, without notice, due to improvements in technology.

45

CX-DVP292U CX-DVP292U