Panasonic CY-BT100U warranty Preparation, QItems for preparation, WPairing, Step

Preparation

Perform electrical wiring for the Hands-Free Kit featuring Bluetooth® technology and install it (\ page 24, 25). Refer to the individual instructions for the devices to be connected as well.

qItems for preparation

¡Hands-Free Kit featuring Bluetooth® technology (CY-BT100U)

¡Bluetooth-ready mobile phone

wPairing

This unit should register the Bluetooth mobile phone to be cou- pled before using.

Step 1

Turn on the power of the Head unit. (Pairing is enabled only when the power of the Head unit is on.)

Note: For the models to be supported, visit the Web Site at: http://www.panasonic.com (Refer to the description regarding Car Audio/AV.)

We do not guarantee that all the functions of this unit are available on all mobile phones.

¡Head unit

The models to be supported are shown below as of December 2005. CQ-C8803 /C8413 / C8313 / C8403 / C8303 / C7403 / C7303 / C7203 / C7103 / C5403 / C5303 / C3433 / C3403 / C3333 / C3303U / VD7003U, etc.

Step 2

Press and hold the [Hang-on]until the indicator blinks slowly (for approximately 2 seconds).

(Press and hold [Hang-up]for more than 2 seconds to

cancel.)

Note: Bluetooth devices other than paired should be switched off during pairing.

Step 3

Make ready your mobile phone for pairing. As for the pairing at the mobile phone’s side, please refer to your mobile phone’s manual.

18