Panasonic DMC-FX48 operating instructions Others

Others

The motion pictures cannot be played back on a TV.

•Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV?

>Connect the camera to the TV with the AV cable (supplied), or with the component cable (DMW-HDC2; optional), and then play back the motion pictures on the camera. (P103, 104)

The picture is not displayed fully on the TV.

>Check [TV ASPECT] setting. (P25)

The picture cannot be transferred when the camera is connected to a PC.

•Is the camera connected to the PC correctly?

•Is the camera recognized by the PC correctly?

>Set to [PC] in [USB MODE]. (P25, 97)

The card is not recognized by the PC. (The built-in memory is recognized.)

>Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.

•When the mode dial is set to [¨], contents of the built-in memory will be displayed.

>Set the mode dial to anything except [¨] .

The picture cannot be printed when the camera is connected to a printer.

•Pictures cannot be printed using a printer which does not support PictBridge.

>Set to [PictBridge(PTP)] in [USB MODE]. (P25, 99)

The ends of the pictures are cut at printing.

>When using a printer with a trimming or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.)

>When you order photo studios to print pictures, ask the photo studio if the pictures can be printed with both ends.

Others

An unreadable language was selected by mistake.

>Press [MENU/SET], select the [SETUP] menu icon [] and then select the [~] icon to set the desired language. (P26)

A red lamp sometimes turns on when the shutter button is pressed halfway.

•In dark places, the AF assist lamp (P76) lights red to make it easier to focus on a subject.

The AF assist lamp does not turn on.

•Is [AF ASSIST LAMP] on the [REC] mode menu set to [ON]? (P76)

•The AF assist lamp does not turn on in bright places.

The camera becomes warm.

•The surface of the camera may become warm during use. This does not affect the performance or quality of the camera.

118 VQT1X57