Panasonic DMC-FX48 Set the language displayed on the screen, JITTER, SUBJ. Move Demo

Preparation

[VERSION DISP.]

It is possible to check which version of firmware is on the camera.

[FORMAT]

The built-in memory or card is formatted. Formatting irretrievably deletes all the data so check the data carefully before formatting.

•Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) and DC coupler (DMW-DCC4; optional) when formatting. Do not turn the camera off during formatting.

•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.

•If the card has been formatted on a PC or other equipment, format it on the camera again.

•It may take longer to format the built-in memory than the card.

•If the built-in memory or the card cannot be formatted, consult your nearest Service Center.

For USA assistance, please call:

1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call:

1-800-99-LUMIX (1-800-995-8649) or

send e-mail to: lumixconcierge@ca.panasonic.com

~[LANGUAGE]

Set the language displayed on the screen.

[ENGLISH]/[DEUTSCH]¢/[FRANÇAIS]¢/[ESPAÑOL]/ [ITALIANO]¢/[繁體中文]¢/[¢]¢

¢Not displayed on DMC-FX48P

•If you set a different language by mistake, select [~] from the menu icons to set the desired language.

DEMO [DEMO MODE]

The camera automatically detects jitter and the movement of the subject and displays these on the indicator. ([JITTER, SUBJ. MOVE DEMO.])

The camera’s features are displayed as slide shows. ([AUTO DEMO])

[JITTER, SUBJ. MOVE DEMO.]
A Jitter detection demonstration	A
B Movement detection demonstration
	B
[AUTO DEMO]:
[OFF]
[ON]

•In Playback mode, [JITTER, SUBJ. MOVE DEMO.] cannot be displayed.

•Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.]. Press [MENU/SET] to close [AUTO DEMO].

•[JITTER, SUBJ. MOVE DEMO.] is an approximation.

•[AUTO DEMO] has no TV output capability even when it is in playback mode.

26 VQT1X57