Panasonic DMC-FX48 operating instructions Disconnecting the USB connection cable safely

Connecting to other equipment

Double-click [DCIM] folder.

Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC.

∫Disconnecting the USB connection cable safely

•Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware.

Note

•This unit cannot be stood upright when the AC adaptor is connected. When placing it down and operating, we recommend placing it on a soft cloth.

•Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5PP; optional).

•Before inserting or removing a card, turn the camera off and disconnect the USB connection cable. Otherwise, data may be destroyed.

•If the camera is connected in clipboard mode, the built-in memory data is displayed even if a card is inserted.

∫Viewing the contents of the built-in memory or card using the PC (folder composition)

1 Folder number

2File number

3	JPG:	Pictures
	MOV:	Motion pictures
MISC:		DPOF print
		Favorite
PRIVATE1:		Clipboard pictures
(Built in memory only)

A new folder is created when pictures are taken in the following situations.

•After [NO.RESET] (P25) in the [SETUP] menu has been executed

•When a card containing a folder with the same folder number has been inserted (Such as when pictures were taken using another make of camera)

•When there is a picture with file number 999 inside the folder

∫Connection in the PTP mode (WindowsR XP, Windows VistaR and Mac OS X only) Set [USB MODE] to [PictBridge(PTP)].

Data can now be read only from the card into the PC.

• When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP mode.

98 VQT1X57