55
VQT1X57
Advanced (Recording pictures)
This is a convenient mode for shooting rapid movement or a decisive moment.
∫Picture size and aspect ratio
1Press 3/4 to select [SPEED PRIORITY] or [IMAGE PRIORITY] and then press
[MENU/SET] to set.
2Press 3/4 to select the picture size and aspect ratio and then press [MENU/SET]
to set.
•3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.
3Take pictures.
•Still pictures are taken continuously whi le the shutter button is pressed fully.
•The burst speed changes according to the recording conditions.
•The number of burst recording pictures are limited by the picture-tak ing conditions and the type
and/or status of the card used.
•The number of burst recording pictures increase immediately after formatting.
Note
•The flash setting is fixed to [Œ].
•[QUALITY] is automatically fixed to [›].
•You can take pictures suitable for 4qk6q/10k15cm printing.
•The focus range is 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to ¶.
•The focus, zoom, exposure, white balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
•The ISO sensitivity is automatically adjusted. Note, however, that the ISO sensitivity is set high
to achieve a high shutter spee d.
•Depending on the operating conditions, it may take time to take the nex t picture if you repeat
taking a picture.
Still pictures are taken continuously with flash. It is convenient to take continuous still pictures
in dark places.
∫Picture size and aspect ratio
1Press 3/4 to select the picture size and aspect ratio and then press [MENU/SET]
to set.
•3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.
2Take pictures.
•Still pictures are taken continuously whi le the shutter button is pressed fully.
Note
•[QUALITY] is automatically fixed to [›].
•You can take pictures suitable for 4qk6q/10k15cm printing.
•The shutter speed becomes 1/30th of a second to 1/2000th of a second.
•The focus range is 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to ¶.
•The focus, zoom, exposure, shutter speed, ISO s ens itivity, and flash level are fix ed to the settings
for the first picture.
•[INTELLIGENTISO] is activated, and maximum ISO sensitivity level becomes [ISO3200].
•See the Note on P43 when using the flash.
ô [HI-SPEED BURST]
Maximum Burst speed approx. 10pictures/second (Speed priority)
approx. 6pictures/second (Image priority)
Number of recordable
pictures approx. 15 to 100
[FLASH BURST]
Number of recordable
pictures max. 5 pictures
DMC-FX48P_PC~VQT1X57_eng.book 55 ページ ２００８年１２月２６日 金曜日 午後６時２５分