Panasonic DMC-FZ150 operating instructions 190

Others

[MEMORY CARD ERROR FORMAT THIS CARD?]

•It is a format that cannot be used with this unit.

>Insert a different card.

>Format the card again with the camera after saving necessary data on a PC etc. (P60) The data on the card will be deleted.

[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]/[SYSTEM ERROR]

•This message will be displayed when the lens does not operate properly because force was applied by hand, or if the lens hood is not attached securely.

>Turn the camera off and on. If the message persists, contact the dealer or your nearest Service Centre.

[MEMORY CARD PARAMETER ERROR]/[THIS MEMORY CARD CANNOT BE USED]

>Use a card compatible with this unit. (P20)

–SD Memory Card (8 MB to 2 GB)

–SDHC Memory Card (4 GB to 32 GB)

–SDXC Memory Card (48 GB, 64 GB)

[INSERT SD CARD AGAIN]/[TRY ANOTHER CARD]

•An error has occurred accessing the card.

>Insert the card again.

>Insert a different card.

[READ ERROR/WRITE ERROR PLEASE CHECK THE CARD]

•It has failed to read or write data.

>Remove the card after turning the power [OFF]. Insert the card again, turn the power on, and try to read or write the data again.

•The card may be broken.

>Insert a different card.

[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING SPEED OF THE CARD]

•Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.

•In the event that it stops even after using a “Class 4” card or higher, the data writing speed has deteriorated so it is recommended to make a backup and then format (P60).

•Depending on the type of the card, motion picture recording may stop in the middle.

[CANNOT RECORD DUE TO INCOMPATIBLE FORMAT(NTSC/PAL) DATA ON THIS CARD.]

>If you want to delete some pictures, format the card after saving necessary data on a PC etc. (P60)

>Insert a different card.

- 190 -