Panasonic DMC-FZ150 Adjust the flash output, Press MENU/SET to close the menu

Recording

Adjust the flash output

Adjust the flash output when the subject is small, or the reflectivity is very high or low.

Press 3 [È] several times to display [FLASH], and then press 2/1 to set the flash output.

•You can adjust from [j2 EV] to [i2 EV] in steps of [1/3 EV].

•Select [0 EV] to return to the original flash output.

Press [MENU/SET] to close the menu.

Note

•When the flash output is adjusted, the flash output value appears on the upper left of the screen.

•The flash output setting is memorised even if the camera is turned off.

•You cannot set [FLASH] in the following cases.

–In Intelligent Auto Mode

–In [EXPRESSIVE], [RETRO], [HIGH KEY], [SEPIA] and [MINIATURE EFFECT] in Creative Control Mode

–In [SCENERY]

–In [NIGHT SCENERY], [HANDHELD NITE SHOT] and [ILLUMINATIONS] in

[NIGHT PORTRAIT]

–In [PANORAMA ASSIST], [SUNSET], [FLASH BURST], [STARRY SKY], [FIREWORKS], [AERIAL PHOTO], [HIGH SPEED VIDEO] and [3D PHOTO MODE] in Scene Mode

–In Creative Video Mode

- 71 -