Panasonic DMC-FZ150 operating instructions Inserting and Removing the Card optional/the Battery

Preparation

Inserting and Removing the Card (optional)/the Battery

•Turn the power switch to [OFF] and confirm that the lens barrel is retracted.

•We recommend using a Panasonic card.

Slide the release lever in the direction of the arrow and open the card/battery door.

• Always use genuine Panasonic batteries.

• If you use other batteries, we cannot guarantee the quality of this product.

Battery: Being careful about the battery orientation, insert all the way until you hear a locking sound and then check that it is locked by lever A.

Pull the lever A in the direction of the arrow to remove the battery.

Card: Push it securely all the way until you hear a “click” while being careful about the direction in which you insert it. To remove the card, push the card until it clicks, then pull the card out upright.

B

B: Do not touch the connection terminals of the card.

1:Close the card/battery door.

2:Slide the release lever in the direction of the arrow.

Note

•Remove the battery after use. (The battery will be exhausted if left for a long period of time after being charged.)

•Remove the card or battery after turning off the power, with the power lamp completely turned off and the lens barrel retracted completely. (The camera may not function properly, or the card or recorded contents may be damaged.)

•When using an AC adaptor (optional) instead of the battery, refer to P179.

- 19 -