Recording

Note

When [AF ] or [ 55AF ] is set, focus prediction will be performed in a possible range to prioritise the

burst speed. Therefore, if you try to take a picture of a subject that is moving fast, it may have trouble with focusing or it may take time to focus.

You can select only [ 2 ], [AF ], [ 5.5 ], [ 55AF ], and [ 12 ] when in Intelligent Auto Mode.

[ 40 ] and [ 60 ] cannot be used in the following cases.

In [NIGHT PORTRAIT], [NIGHT SCENERY] or [ILLUMINATIONS] in [NIGHT PORTRAIT]

In [HIGH SENS.] in Scene Mode

When [ 40 ] or [ 60 ] is selected, [QUALITY] can only be set to [A] or [].

When [ 12 ], [ 40 ] or [ 60 ] is set, the recording may be brighter or darker from the second picture depending on changes in the brightness of the subject.

Recording is performed by the electronic shutter when [ 40 ] or [ 60 ] is selected, so the recorded picture may appear warped.

When the Self-Timer is used, the number of recordable pictures in Burst Mode is fixed to 3.

The burst speed (pictures/second) may become slower depending on the recording environment such as in dark places, if the ISO sensitivity is high etc.

Burst Mode is not cancelled when the camera is switched off.

[Œ] is set for the flash when Burst is set.

The Burst Mode cannot be used in the following cases.

When the Self-timer is set to [10S / 3PICTURES]

In [PIN HOLE] and [MINIATURE EFFECT] in Creative Control Mode

In [HANDHELD NITE SHOT] in [NIGHT PORTRAIT]

In [PANORAMA ASSIST], [FLASH BURST], [STARRY SKY], [FIREWORKS], [PHOTO FRAME], [HIGH SPEED VIDEO] and [3D PHOTO MODE] in Scene Mode

Even if recording with [AF ] or [ 55AF ] setting, the focus is not adjusted for each picture when using AF Lock.

The zoom cannot be used when recording burst pictures.

- 79 -

Page 79
Image 79
Panasonic DMC-FZ150 operating instructions Is set for the flash when Burst is set