Panasonic DMC-FZ150 operating instructions 111, Quality, Sensitivity

Recording

[QUALITY]

Applicable modes:

Set the compression rate at which the pictures are to be stored.

[A]			A JPEG image in which image quality was given priority.
[›]		JPEG	A standard image quality JPEG image.
			This is useful for increasing the number of shots without changing the
			number of pixels.
[	]	RAWiJPEG	You can record a RAW image and a JPEG image ([A] or [›])
			simultaneously.¢1
[	]
[	]	RAW	You can only record RAW images.¢2

¢1 If you delete a RAW file from the camera, the corresponding JPEG image will also be deleted.

¢2 It is fixed to maximum recordable pixels for each image aspect ratio.

Note

•In [HIGH SENS.] and [FLASH BURST] in Scene Mode, this setting is fixed to [›].

•You can enjoy more advanced picture editing if you use RAW files. You can save RAW files in a file format (JPEG, TIFF etc.) that can be displayed on your PC etc., develop them and edit them

using the software “SILKYPIX Developer Studio” by Ichikawa Soft Laboratory on the CD-ROM (supplied).

• [ ] images are recorded with a smaller data volume than [ ] or [ ].

•The following icons are displayed during the 3D recording.

[ ]: MPOiFine (Both MPO images and fine JPEG images are recorded simultaneously.)

[ ]: MPOiStandard (Both MPO images and standard JPEG images are recorded simultaneously.)

[SENSITIVITY]

•Refer to P80 for details.

- 111 -