Panasonic DMC-FZ150 operating instructions Diopter adjustment

Before Use

Note

•Be careful as this unit may get scratched if you rotate the LCD monitor without opening the LCD monitor fully.

•Check that the terminal door is closed when rotating the LCD monitor. The terminal door may get damaged or LCD monitor may get scratched if you rotate the LCD monitor with the terminal door opened.

•When not using the LCD monitor it is recommended that you close it with the screen facing inwards to prevent dirt and scratches.

•Note that operating noise may be recorded when recording a motion picture with the LCD monitor rotated.

Viewfinder

∫ Switching the LCD monitor/Viewfinder

Press [EVF/LCD].

• You can switch between LCD monitor display and Viewfinder display.

• Switching via the [EVF/LCD] button will be maintained even when the power of the digital camera is turned [OFF].

∫ Diopter adjustment

Adjust the diopter to suit your vision so that you can see the

Viewfinder clearly.

Look at the display on the Viewfinder and rotate the diopter adjustment dial to where the screen is in focus.

A Diopter adjustment dial

- 10 -