Panasonic DMC-FZ150 Using the Playback Zoom, Rotate the zoom lever towards Z T k2k4k8k16k

Basic

Using the Playback Zoom

Rotate the zoom lever towards [Z] (T). 1k>2k>4k>8k>16k

• When you rotate the zoom lever towards [L] (W) after
enlarging the picture, the magnification becomes lower.
• When you change the magnification, the zoom position
indication A appears for about 1 second, and the position of
the enlarged section can be moved by pressing 3/4/2/1.	A
• The more a picture is enlarged, the more its quality
deteriorates.
• The side lever cannot be used for Playback Zoom.

W T

∫Switching the displayed image while maintaining the Playback Zoom

You can switch the displayed image while maintaining the same zoom magnification and zoom position for the Playback Zoom.

Rotating the rear dial to select the picture during Playback Zoom.

•The zoom position returns to the centre in the following images.

–Images with different aspect ratios

–Images with different numbers of recorded pixels

–Images with a different rotation direction (when [ROTATE DISP.] is set to [ON])

∫Enlarge the focus point (display focus point)

This unit will remember the focus point during the recording, and it can be enlarged with that point as a centre.

Press [FOCUS] during image playback.

•Focus point may not be the centre of enlargement when it is at the edge of the image.

•It will return to the original enlargement if [FOCUS] is pressed again.

•Following pictures cannot be enlarged because there is no focus point:

–Picture that was taken without focusing

–Picture that was taken with Manual Focus

–Picture that was taken with a different camera

- 41 -