Preparation

ªBattery indicator

The remaining battery power is displayed on the LCD monitor/Viewfinder. (This is not displayed when using AC adaptor)

: The battery power is sufficient

: The remaining power is a little low

: The remaining power is low

: Recharge or replace the battery

ªCharging time and available recording time

Measured under the following conditions:

Shooting once every 30 seconds, flash every other shot.

Measured using supplied 8 MB SD Memory Card.

Temperature: 77 F (25°C)/Humidity: 60%

 

Charging time

Continuous recording/playback time

 

 

(recordable number)

 

 

 

 

 

Recording with LCD monitor

 

 

Approx. 100 min.

Supplied battery

Approx. 90 min.

(equal to 200 still pictures)

 

 

 

 

 

Recording with Viewfinder

 

 

Approx. 120 min.

 

 

(equal to 240 still pictures)

 

 

 

 

 

Playback with LCD monitor

 

 

Approx. 120 min.

 

 

 

The times shown in the table are approximate times. The times may vary depending on the condition.

ªCharging environment and charging error

Charge the battery in a place with a temperature of 50 F - 95 F (10°C - 35°C). (The battery should also be the same temperature.)

When charging starts, the [CHARGE] indicator lights. If, after charging starts, the [CHARGE] indicator blinks at about 1 second cycles, this indicates a charging error.

In this case, remove the AC adaptor from the electrical outlet, remove the battery and check if both room and battery temperature is too low or high and then charge it again. If the problem persists, consult the dealer or your nearest servicenter.

13

Page 13
Image 13
Panasonic DMC-FZ1PP operating instructions Battery indicator