Panasonic DMC-FZ1PP operating instructions Troubleshooting

Others

Troubleshooting

1:The power does not turn on. 1-1: Are the battery and the AC

adaptor correctly connected? Check the connection.

1-2: Is the battery sufficiently charged? Use a battery that has been sufficiently charged.

2:As the power is turned on, it

turns off immediately.

2-1: Is the battery charge insufficient to operate the camera? Charge the battery or replace it with charged one.

2-2: Has condensation occurred? Carrying the digital camera from a cold place to a warm place could cause condensation to form inside the camera. Wait until condensation disappears.

3:The image cannot be recorded. 3-1: Is the Memory Card inside?

3-2: Is the mode dial correctly set ? Check it.

3-3: There is no memory capacity left on the card. Before recording, delete some images.

4:The image is not displayed on

the LCD monitor.

4:Is the the image displayed on the Viewfinder? Press the [DISPLAY] button to switch to LCD monitor display.

5:The LCD monitor/Viewfinder is too bright or dark.

5:Adjust the brightness of the LCD monitor/Viewfinder.

6:Flash does not fire.

6:Is the flash closed? Press the

[ OPEN] button to open the flash.

7:The display or images on the LCD monitor/Viewfinder are not focused.

7:Set the mode dial to the mode corresponding to the distance to the subject.

8:The image will not play back. 8-1: Is the Memory Card inside?

8-2: There is no image in the Memory Card.

8-3: The mode dial is not set to

playback [ ].

9:The image is not displayed on the television.

9-1: Is the camera correctly connected with the TV? Check it.

9-2: Set the TV to video input mode.

10:When connecting to a PC, images cannot be transferred.

10-1: Check that the camera is correctly connected to the PC.

10-2: Is the camera correctly recognized by the PC?

11:The clock setting is reset.

11-1: If you do not use the camera for a long time, the clock setting may be reset. When the message

[PLEASE SET THE CLOCK] appears, set the clock again.

11-2: When you take a picture before setting the clock, [0:00 0. 0. 0] is recorded.

96