Preparation

Setting the Date/Time (Clock Set)

7

1,6

2,3,4,5

3

REC SETUP 2/2

NO.RESET

 

RESET

 

CLOCK SET

 

LANGUAGE

ENG

SELECT SET EXIT MENU

4,5

CLOCK SET

10:00 JAN. 1 . 2003

M/D/Y

SELECT SET EXIT MENU

If the message [PLEASE SET THE CLOCK] appears, set the date and time.

You can go to the setup menu by pressing the [MENU] button while the message is displayed.

You can set the year from 2002 to 2099. The 24-hour system is used.

1Press the [MENU] button.

2Press 1 to make the setup menu appear.

In simple mode, skip this step.

3Press 3/4 to select [CLOCK SET], and then press 1.

4Press 3/4/2/1 to set date and time, and then press 1.

5Press 3/4 to select [M/D/Y], [D/M/Y] or [Y/M/D].

6Press the [MENU] button twice.

The menu will disappear.

7Check if the date/time setting is displayed correctly, after turning the camera [OFF] and [ON].

After a fully charged battery is installed in the camera for at least 1 hour, the time and date will be held for approximately 24 hours if the battery is removed. If the battery was not fully charged the time may not be retained properly. If the time/date setting is lost please reset it.

27

Page 27
Image 27
Panasonic DMC-FZ1PP Setting the Date/Time Clock Set, Press the Menu button Press 1 to make the setup menu appear