Technical use
78
Using the Auto Review
Recording with the auto review set to
[1 SEC.]/[3 SEC.], the recorded picture is
automatically displayed on the LCD monitor/
Viewfinder for 1 or 3 seconds.
[Preparation]
• Set the mode dial except for [ ]/[ ].
(P25)
1Press the [MENU] button.
2Press 1 to open the setup menu
.
3Press 3/4 to select [AUTO REVIEW]
.
4Press 2/1 to select [
1SEC.] or
[
3 SEC.].
5Press the
[MENU] button.
• The menu will disappear.
• Even when setting the auto review to [1 SEC.]/[3 SEC.], it is not available in
motion image mode [ ].
• When recording in burst mode, auto bracket, still picture with audio modes, the
recorded picture is automatically displayed.
• In simple mode [ ], the auto review setting becomes [ON] (1 second) or [OFF].
1,5 2,3,4
BEEP
SETUP
1/2
SELECT SET EXIT
MENU
REC
MONITOR
AUTO REVIEW
OFF 1 SEC. 3 SEC.
POWER SAVE
3,4