Preparation

Inserting the Card

1 3

1

OPEN

2

[Preparation]

Check that the power switch is set to [OFF] and the lens is stored.

Close the flash. (P36)

[Inserting the card]

1Slide the lever in the direction of the arrow to open the Memory Card/ battery door.

2Insert the card all the way in until it clicks.

Check the direction of the card.

Cards can be installed backwards. If this occurs the card will protrude slightly and the door will not close. Please pay special attention when inserting cards.

Do not touch the connection terminals on the back side of the card.

3Close the Memory Card/battery door.

14

2

[Removing the card]

1Open the Memory Card/battery door.

2Press the card to release.

3Pull the card out.

4Close the Memory Card/battery door.

If the Memory Card/battery door cannot be completely closed, take the card out and insert it again.

If the card cannot be fully inserted, verify whether the direction of the card is correct.

We recommend that you use a Panasonic branded SD Memory Card. (Use only the genuine card)

If the card is not fully inserted, the card may be damaged.

15

Page 15
Image 15
Panasonic DMC-FZ1PP operating instructions Inserting the Card, Inserting the card, Removing the card