Panasonic DMC-FZ1PP operating instructions SD Memory Card, MultiMediaCard

Preparation

ªAccess to the card

When the card is being accessed, the card access indication 1 lights.

1600

When the card access indication 1 lights, do not remove the battery, or pull out the card.

Do not disconnect the DC cable when using the AC adaptor.

The card and the card contents may be destroyed and the camera may not operate normally.

As there is a risk that the data on the card may be damaged or erased due to the electrical noise, static electricity or the defects of camera/card, please back up your data on your PC using USB connection. (P84)

ªSD Memory Card (supplied) and MultiMediaCard (optional)

The SD Memory Card and MultiMediaCard are small, lightweight, removable external cards. The SD Memory Card is equipped with a write protection switch that can inhibit writing and formatting. (When the switch is moved towards the [LOCK] side, it is not possible to write or delete data on the card and format it. When the switch is unlocked, these functions become available.)

SD Memory Card

• RP-SDH512 (512 MB)

• RP-SDH256 (256 MB)

•RP-SD128BJ (128 MB)

•RP-SD064B (64 MB)

• RP-SD032B (32 MB)

•RP-SD016B (16 MB)

•RP-SD008B (8 MB)

MultiMediaCard

•The reading/writing speed of MultiMediaCards is

slower than SD cards. When MultiMediaCards are used, the performance

of certain features may be slightly slower than advertised.

•After recording motion images using the MultiMediaCard, the card access indication may appear for a while, but this is not a malfunction.

16