Others
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
Major messages are described below as examples.
[THIS MEMORY CARD IS PROTECTED]
Unlock [LOCK] of the
[NO VALID IMAGE TO PLAY]
Play back after recording or after inserting a card with a recorded picture.
[THIS PICTURE IS PROTECTED]
After canceling the protect setting, delete or overwrite the picture.
[THIS PICTURE CANNOT BE
DELETED ] / [SOME PICTURES CANNOT BE DELETED]
The pictures not based on the DCF standard cannot be deleted.
[CANNOT BE SET ON THIS PICTURE ] / [CANNOT BE SET ON SOME PICTURES]
If the pictures are not based on the DCF standard, the DPOF print cannot be set.
[NO ADDITIONAL DELETE SELECTIONS CAN BE MADE]
You have exceeded the number of pictures that can be set at once with [MULTI DELETE]. Once delete the selected pictures and then repeat deleting multiple pictures.
[MEMORY CARD ERROR FORMAT THIS CARD?]
The format of the card cannot be recognized by the camera. Format the card again with the camera.
[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]
This message appears when the camera does not operate properly. Turn the camera off and on. If the message persists, contact the dealer or your nearest servicenter.
[MEMORY CARD ERROR]
Failed access to the card.
Insert the card again.
[READ ERROR]
Data reading error.
Play it back again.
[WRITE ERROR]
Data writing error.
Turn the camera off and remove the card. Then insert the card and turn the camera on again. Be sure that the camera is turned off before removing or inserting the card to avoid damage.
109
VQT0Q09