
Preparation |
|
Attaching the Lens Hood |
|
In bright sunlight or backlight, the lens hood |
|
will minimize lens flare and ghosting. | [LOCK] |
The lens hood cuts out excess light and |
|
improves the picture quality. |
|
• Check that the camera is turned off and |
|
that the lens is retracted. |
|
• Close the flash. |
|
1 1
2Place the camera upside down. Align [UNLOCK] to groove B on the camera then slide the lens hood adaptor over the lens until it stops.
[UNLOCK]
• Rotate the ring until it clicks.
3 1 Place the camera right way up. Align marker D on the lens hood to marker E on the adaptor and push the lens hood onto the adaptor.
2Rotate the lens hood clockwise until it stops at marker F.
2 Rotate ring C clockwise until [LOCK] mark is aligned with marker A on the adaptor.
20
VQT0Q09