Recording pictures (basic)
46
VQT0Q09
Taking Pictures using Auto Bracket
In this mode, 3 pictures are automatically
recorded by each press of the shutter
button according to the compensation
range of the exposure.
You can select the desired exposure
among the 3 types of pictures.

1Press 3 several times until

[ AUTOBRACKET] appears

and then set the compensation

range of the exposure.

•You can select the exposure from
j1EV to i1 EV in steps of 1/3 EV.
•When you do not us e auto bracket,
select [OFF].
•When setting the auto bracket, the auto
bracket icon appears on the lower left of
the screen.
•If the remaining number of recordable
pictures is 2 or less, you cannot take
pictures by setting auto bracket.
•When taking pictures us ing auto bracket
after the exposure compensation, the
pictures are based on the compensated
exposure.
When the exposure is compensated, the
compensated exposure value appears on
the lower left of the screen.
•When the flash is activated, you can take
only 1 picture.
•When the auto bracket is activated,
[AUDIO REC.] cannot be used (DMC-FZ5
only).
•When setting the quality to [ TIFF], you
cannot take pictures with the auto bracket.
•When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed.
•The exposure may not be compensated
with auto bracket depending on the
brightness of the subject.
•Auto bracket is canceled after switching
the camera off.
•When setting the aut o bracket, the auto
review function is activated regardless of
the setting on the auto review function.
(The picture is not enlarged.) Moreover,
the settings for the auto review function on
the [SETUP] menu are disabled.
AUTO BRACKET
SELECT EXIT
VQT0Q09ENG.book 46 ページ ２００５年１月２５日　火曜日　午後８時１７分